New short and service-friendly shaft coupling (Image source: KTR Systems GmbH)

The ROFLEX is available in two designs and currently in seven sizes for torques from 65 to 790 Nm. Another five sizes will be added by the middle of 2022 and extend the performance range up to 5,000 Nm.

The ROFLEX is a short shaft coupling in which the input and output shafts can be pushed together between 3 and 6 mm, depending on the size. The torque is transmitted via elastomer packages, which at the same time compensate for misalignments and dampen shocks and torsional vibrations. Should the elastomers fail due to extreme loads, the fail-safe coupling continues to hold the torque.

The ROFLEX is made of grey cast iron and is available in two types: In type N, both the pocket and the cam part consist of standard hubs. In the SH SPLIT design, on the other hand, the cam hub is split. Here, the hub is specifically and mechanically separated into two halves by "fracture cutting", or "cracking". The resulting fracture surfaces centre both hub halves precisely with each other, which makes incorrect assembly almost impossible. The hub halves can be mounted on block, the fit of the bore remains unchanged. Depending on accessibility, the hub can be pushed on for assembly. Or the two hub halves can be joined around the shaft; thus the split hub can be radially installed and removed without dismantling the adjacent units.

"As a rule, we recommend that our customers fit the SH-SPLIT hub onto the motor shaft. This makes the coupling easier to assemble overall and in case of service there is more space available, for example to exchange the elastomer packs", says Michael Brüning, Product Manager at KTR. "In addition, it allows the user to carry out the direction of rotation check on the engine without the coupling hub."

The ROFLEX has been assessed and confirmed according to the European ATEX product directive 2014/34/EU and is suitable for use in potentially explosive atmospheres. Core industries are pumps and compressors; other areas of application in general mechanical engineering are gearboxes, fans and belt drives.

Both types are currently available in seven sizes for torques from 65 to 790 Nm. Five more sizes in the power range up to 5,000 Nm are to be added by mid-2022.

Armstrong Fluid Technology has announced the availability of a new Parts Kits Brochure for more than two dozen pumps and circulators. The set of solutions covered includes all Design Envelope pumps (Permanent Magnet Motors, Intelligent Vertical Multi-stage and Intelligent Variable Speed), EVERCOOL Booster systems and select models of Fire Pumps and circulators.

Flender is expanding the portfolio in the field of industrial couplings by introducing clamping elements for the connection of shaft and hub.

Atlas Copco has acquired Qolibri Inc., a company that provides proprietary technologies for semiconductor subfab operations.

KTR Systems GmbH has developed a torsionally flexible intermediate shaft coupling the centre piece of which is made of high-strength aluminium allowing for shaft distances of up to 4,000 mm. The ROTEX ZRS is initially available in five sizes for torques up to 560 Nm.

CIRCOR International, Inc. highlights its broad range of pumps and valves product technologies for the hydrogen economy.

Climate change, urbanisation, water pollution and stricter laws and regulations – water management is facing major challenges. In order to meet the increasing demand for clean water and to protect water resources sustainably, innovations, ideas and initiatives are required.

impeller.net – Inform. Select. Buy.

The international information and sales platform for centrifugal pumps.